| Statistics |
Total online: 1 Guests: 1 Users: 0 |
|
Main » 2013 » July » 08 » How Brakes Work by April Andy
1:22 PM How Brakes Work by April Andy |
How Brakes Work by April Andy
Inertia or momentum, as described by
Newton�s Law of Motion, is the tendency of an object to remain in its current
state and resist change. It is measured by an object�s mass when stationary, its
mass and velocity when in motion. How do these laws of physics relate to the
average commuter? It�s simple. Engineers use algebraic formulas relating to the
Law of Motion to design braking systems that will arrest the forward momentum of
a 4, 000 pound vehicle traveling at 88 feet per second. Therefore, you have a
reasonable expectation that your car will stop when you step on the brake pedal.
Keep in mind, however, that brakes are a wearable item, meaning that
certain components of the braking system will wear out before the rest of the
car. These components are:
� Brake Rotors - Brake rotors are flat steel
discs mounted vertically to the vehicle�s axel. They are approximately Charlotte
Olympia Birthday Sagittarius Zodiac Suede Smoking Slipper In Mustard nine to
ten inches in diameter and one inch thick on most domestic, passenger vehicles.
Many rotors are designed with vanes sandwiched between two friction surfaces.
This is to dissipate excess heat when the brakes are actuated. Each manufacturer
publishes the minimum rotor thickness designed for a particular vehicle. When
rotors wear to this minimum, they need to be replaced. Ask your service
professional to measure the rotor thickness each time your brakes are
inspected.
� Brake Pads - Brake pads consist of friction material on a
steel backing plate. The pads are mounted to the stationary brake caliper. When
the brakes are actuated, the stationary pads clamp both side of the spinning
rotor. This causes friction which in turn produces thermal energy, or heat. The
frictions of the pads on the spinning rotors cause the rotors to slow which in
turn slow the vehicle�s wheels. This friction and heat cause microscopic
particles to be lost on both pads and rotors each time the brakes are actuated.
Pads should be replaced when 75% to post by haiyan701 80% of the friction
material is worn away.
� Brake Fluid - Brake fluid is a misnomer for
hydraulic oil especially formulated to be used in certain types of hydraulic
brake systems. Hydraulic brake components consist mostly of steel. Brake fluid
is hygroscopic. This means that all water molecules have been removed in order
to prevent internal corrosion of the brake parts. However, this causes brake
fluid to attract moisture. Over time the brake fluid will become saturated with
water. This is the primary reason to periodically replace the brake fluid. Check
the owner�s manual for the replacement schedule or have your service
professional check for moisture or rust scale in the fluid.
Your ability
to commute safely day in and day out is literally riding on the condition of
your car�s brakes. All highway systems and accompanying traffic laws are
designed on the premise that vehicles can stop at certain points. Without this
ability our roadways would be dangerously chaotic. Have your car�s brakes
checked often. A good rule-of-thumb is to perform a visual brake inspection each
time the tires are rotated, or every 5,000 miles.
Formore information
please visit as at
<
|
|
Views: 185 |
Added by: gtfhadfg
| Rating: 0.0/0 |
|
|
|
